This page was exported from New Real Practice Test With VCE And PDF For Free Download [ http://www.actualtest.info ]
Export date: Thu Mar 28 19:56:30 2024 / +0000 GMT

(New Updated) Premium Microsoft 70-417 Exam Braindumps With 100 Percent Pass Rate (1-15)



All PassLeader's 70-417 braindumps were updated in recent three days with the change of new exam questions, we ensure our 70-417 exam dumps are the newest and valid enough to pass your test. Visit our PassLeader website and get the exam questions with pdf And vce.

NEW QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server 1. Server1 runs Windows Server 2012 R2. You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?

A.    New-StoragePool
B.    Diskpart
C.    File Server Resource Manager (FSRM)
D.    New-StorageSubsytemVirtualDisk

Answer: B
Explanation:
You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:vdisksdisk1.vdh with a maximum file size of 16 GB (or 16,000 MB).

NEW QUESTION 2
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)
21_thumb[1]
You create a virtual machine on Server1. You need to ensure that you can configure a pass-through disk for the virtual machine. What should you do?

A.    Convert Disk 1 to a GPT disk.
B.    Convert Disk 1 to a dynamic disk.
C.    Delete partition E.
D.    Take Disk 1 offline.

Answer: D

NEW QUESTION 3
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1. VM1 has a legacy network adapter. You need to assign a specific amount of available network bandwidth to VM1. What should you do first?

A.    Add a second legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
B.    Add a second legacy network adapter, and then configure network adapter teaming.
C.    Remove the legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
D.    Remove the legacy network adapter, and then add a network adapter.

Answer: D
Explanation:
Add a New network adapter because the legacy network adapter doesn't support bandwidth management.
http://technet.microsoft.com/en-us/library/hh848457(v=wps.620).aspx

NEW QUESTION 4
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1. On VM5, you install a network monitoring application named Monitor1. You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1. Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)

A.    Get-VM "VM6" | Set-VMNetworkAdapter-IovWeight 1
B.    Get-VM "VM5" | Set-VMNetworkAdapter -IovWeight 0
C.    Get-VM "VM6" | Set-VMNetworkAdapter -PortMirroring Source
D.    Get-VM "VM6" | Set-VMNetworkAdapter -AllowTeaming On
E.    Get-VM "VM5" | Set-VMNetworkAdapter -PortMirroring Destination
F.    Get-VM "VM5" | Set-VMNetworkAdapter -AllowTeaming On

Answer: CE
Explanation:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination. If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets. If set to Destination, it receives copied packets from the source virtual network adapter. In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
http://technet.microsoft.com/en-us/library/hh848457.aspx

NEW QUESTION 5
Hotspot Question
Your network contains an Active Directory domain named contoso.com. Technicians use Windows Deployment Services {WDS) to deploy Windows Server 2012 R2. The network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. You need to ensure that you can use WDS to deploy Windows Server 2012 R2 to a virtual machine named VM1. Which settings should you configure? To answer, select the appropriate settings in the answer area.
51_thumb[2]

Answer:
52_thumb[2]

NEW QUESTION 6
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. You create a checkpoint of VM1, and then you install an application on VM1. You verify that the application runs properly. You need to ensure that the current state of VM1 is contained in a single virtual hard disk file. The solution must minimize the amount of downtime on VM1. What should you do?

A.    From a command prompt run dism.exe and specify the /commit-image parameter.
B.    From a command prompt, run dism.exe and specify the /delete-image parameter.
C.    From Hyper-V Manager, delete the checkpoint.
D.    From Hyper-V Manager, inspect the virtual hard disk.

Answer: C

NEW QUESTION 7
Hotspot Question
You have a Hyper-V host named HYPERV1. HYPERV1 hosts a virtual machine named DC1. You need to prevent the clock on DC1 from synchronizing from the clock on HYPERV1. What should you configure? To answer, select the appropriate object in the answer area.
71_thumb[2]

Answer:
72_thumb[1]

NEW QUESTION 8
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots. You need to modify the snapshot file location of VM1. What should you do?

A.    Right-click VM1, and then click Export...
B.    Shut down VM1, and then modify the settings of VM1.
C.    Delete the existing snapshots, and then modify the settings of VM1.
D.    Pause VM1, and then modify the settings of VM1.

Answer: C
Explanation:
You will need to navigate to the Hyper-V Management snap-in (C:ProgramDataMicrosoftWindowsHyper-V) and from there access the Snapshot file Location tab where you can change the settings for the VM1 snapshot file location. However, since there are already several snapshots in existence, you will need to delete them first because you will not be able to change the location of the snapshot file while there is an existing snapshot and you need to modify the snapshot file location of VM1.


http://www.passleader.com/70-417.html

NEW QUESTION 9
You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1. You need to ensure that you can create a 3-TB volume on Disk 5. What should you do?

A.    Create a storage pool.
B.    Convert the disk to a GPT disk.
C.    Convert the disk to a dynamic disk.
D.    Create a VHD, and then attach the VHD.

Answer: B
Explanation:
http://msdn.microsoft.com/en-us/library/windows/hardware/gg463525.aspx

NEW QUESTION 10
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1. All servers in the domain run Windows Server 2012 R2. You need to create a new volume on File1. The new volume must have the following configurations:
- Have the drive letter T
- Have the FAT32 file system
- Be stored on a new virtual hard disk
In which order should you run the Diskpart commands? To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
101_thumb[2]

Answer:
102_thumb[2]

NEW QUESTION 11
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 run a Server with a GUI installation of Windows Server 2012 R2. You remove the Graphical Management Tools and Infrastructure feature on Server2. You need to restart Server2. What should you do? (To answer, drag the appropriate tools to the correct statements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
111_thumb[1]

Answer:
112_thumb[1]

NEW QUESTION 12
You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2. Corel has the Hyper-V server role installed. Corel has two network adapters from different third-party hardware vendors. You need to configure network traffic failover to prevent connectivity loss if a network adapter fails. What should you use?

A.    New-NetSwitchTeam
B.    Install-Feature
C.    Add-NetSwitchTeamMember
D.    Netsh.exe

Answer: A

NEW QUESTION 13
Hotspot Question
You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter. From Windows PowerShell, you run the following command: Remove-WindowsFeature Server-Gui-Shell. In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1. Make only one selection in each row. Each correct selection is worth one point.
131_thumb[1]

Answer:
132_thumb[1]

NEW QUESTION 14
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2 Standard. You establish a Remote Desktop session to Server1. You need to identify which task can be performed on Server1 from within the Remote Desktop session. What should you identify?

A.    Install a feature by using Server Manager.
B.    Modify the network settings by using Sconfig.
C.    Disable services by using Msconfig.
D.    Join a domain by using the System Properties.

Answer: B
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
http://technet.microsoft.com/en-us/library/jj647766.aspx

NEW QUESTION 15
Hotspot Question
You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
151_thumb
You need to ensure that Server2 can be managed by using Server Manager from Server1. In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.
152_thumb[1]

Answer:
153_thumb[2]
Explanation:
http://technet.microsoft.com/library/hh831453.aspx


PassLeader now suppling the latest and 100 percent pass 70-417 practice test, we ensure the 70-417 vce and pdf dumps are the newest, and you can pass 70-417 test without difficults. Visit the site passleader.com and get the free exam vce and pdf dumps to acquire high score in real test.

http://www.passleader.com/70-417.html

 

 


Post date: 2014-11-26 08:57:42
Post date GMT: 2014-11-26 08:57:42
Post modified date: 2014-11-26 08:57:42
Post modified date GMT: 2014-11-26 08:57:42

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com