This page was exported from New Real Practice Test With VCE And PDF For Free Download [ http://www.actualtest.info ] Export date:Fri Mar 29 6:28:21 2024 / +0000 GMT ___________________________________________________ Title: (New Version) Pass 350-029 Certification Successfully By Using Passleader Free Cisco 350-029 Study Materials (487-554) --------------------------------------------------- Info For 100% Exam Pass: PassLeader have been updated the 350-029 554q exam dumps and added the new exam questions, in the latest version of VCE and PDF braindumps, you will get all the new changed 350-029 exam questions, which will help you 100% passing exam, and you will get the free version of VCE Player together with your 350-029 554q practice tests. NEW QUESTION 487What are the three operating modes of HDLC? (Choose three.) A.    Normal Peer ModeB.    Asynchronous Balanced ModeC.    Asynchronous Client ModeD.    Normal Response ModeE.    Asynchronous Response ModeF.    Normal Balanced Mode Answer: BDE NEW QUESTION 488In inter-AS multicast, which two optional nontransitive path attributes were introduced in BGP to carry unicast and multicast routing information for RPF check at the AS borders? (Choose two.) A.    MP_UNREACH_NLRIB.    MP_REACH_NLRIC.    FWDR_PREF DetailsD.    MP_PERF_NLRIE.    ORIGINATOR_ID Answer: AB NEW QUESTION 489Which three options are tasks of the BGP scanner process? (Choose three.) A.    processing of BGP packetsB.    processing any route "churn"C.    updating IP RIBD.    providing BGP Dampening information updatesE.    performing Conditional Advertisement checksF.    performing BGP synchronizationG.    checking next-hop reachability Answer: DEG NEW QUESTION 490Refer to the exhibit. Which BGP feature causes the BGP RIB entry "inaccessible"? A.    BGP synchronizationB.    eBGP multihopC.    BGP scannerD.    BGP NHT Answer: D NEW QUESTION 491Which option is the minimum MTU of a link to form a full IS-IS adjacency successfully? A.    4096 bytesB.    1500 bytesC.    1492 bytesD.    1460 bytes Answer: C NEW QUESTION 492Refer to the exhibit. Router A is configured with a BGP keepalive timer of 20 seconds and a BGP holddown timer interval of 60 seconds. The BGP peer router B is configured with 5 seconds of keepalive interval and 15 seconds of holddown timer interval.Which option is the value of the keepalive interval and holddown timers, respectively, after the successful BGP TCP negotiation between router A and router B? A.    BGP TCP negotiation will not be successful.B.    20 and 60 secondsC.    5 and 15 secondsD.    Router A will use 20 and 60 seconds and router B will use 5 and 15 seconds.E.    Router B will use 20 and 60 seconds and router A will use 5 and 15 seconds. Answer: C NEW QUESTION 493Which statement about the Link Control Protocol is true? A.    LCP is used for basic PPP link setup and operation.B.    LCP is used for PPP CHAP authentication.C.    LCP is used for PPP over ATM setup.D.    LCP is used for PPP over Ethernet setup.E.    LCP is used for PPP over Frame Relay setup. Answer: A NEW QUESTION 494Which SONET protocol layer is in charge of clock synchronization and timing issues? A.    PhotonicB.    SectionC.    PathD.    Line Answer: B NEW QUESTION 495Which IEEE task group provides a method to implement QoS on an Ethernet level? A.    802.1abB.    802.1pC.    802.1qD.    802.1sE.    802.1w Answer: B NEW QUESTION 496Which E3 alarm indicates that there could be an issue with the transmit signal with the local equipment? A.    rxLoSB.    rxLoFC.    rxRAID.    txRAIE.    txLoFF.    txLoS Answer: C NEW QUESTION 497What is the payload capacity of an SDH/STM1 circuit? A.    155.52 MbpsB.    150.336 MbpsC.    153.472 MbpsD.    151.424 Mbps Answer: B http://www.passleader.com/350-029.html NEW QUESTION 498Which option is the SONET frame format of the STM-4 SDH circuit? A.    STS-1B.    STS-192C.    STS-12D.    STS-3 Answer: C NEW QUESTION 499Refer to the exhibit. Which two Layer 2 headers of the frames that are initiated from router A will successfully reach router B? (Choose two.) A.    04 fe 7f b0 08 c1 c4 7d 4f 8f 8a 68 81 00 00 d2 08 00B.    04 fe 7f b0 08 c1 c4 7d 4f 8f 8a 68 81 00 00 d5 08 00C.    04 fe 7f b0 08 c1 c4 7d 4f 8f 8a 68 81 00 01 d2 08 00D.    04 fe 7f b0 08 c1 c4 7d 4f 8f 8a 68 81 00 01 d5 08 00E.    04 fe 7f b0 08 c1 c4 7d 4f 8f 8a 68 81 00 02 d2 08 00F.    04 fe 7f b0 08 c1 c4 7d 4f 8f 8a 68 81 00 02 d5 08 00 Answer: BC NEW QUESTION 500What are three advantages of PPPoA implementation? (Choose three.) A.    NAP and NSP provide secure access to corporate gateways without managing end-to-end PVCs. NAP and NSP use Layer 3 routing, Layer 2 Forwarding, or Layer 2 Tunneling Protocol tunnels. Hence, they can scale their business models for selling wholesale service.B.    Only a single session per CPE on one virtual channel (VC). The username and password are configured on the CPE, so all users behind the CPE for that particular VC can access only one set of services. Users cannot select different sets of services, although using multiple VCs and establishing different PPP sessions on different VCs is possible.C.    The NSP can oversubscribe by deploying idle and session timeouts using an industry standard RADIUS server for each subscriber.D.    If a single IP address is provided to the CPE, and NAT or PAT is implemented, certain applications such as IPTV, which embed IP information in the payload, will not work. Additionally, if an IP subnet feature is used, an IP address also has to be reserved for the CPE.E.    PPPoA can use the features on the SSG.F.    Cisco Service Selection Gateway is not compatible with PPPoA. Answer: ACE NEW QUESTION 501Router 1 is a PE router within the MPLS core network. The router is designed to provide multicast VPN services for VRF A. A requirement of the core network prevents RP configuration and focuses on SSM for all multicast traffic. Consider this configuration:Router 1!vrf definition Ard 1001:1001!address-family ipv4route-target export 1001:1001route-target import 1001:1001mdt default 235.1.1.1Which configuration is needed to support MDT? A.    access-list 110 permit 235.1.1.1 0.0.0.0ip pim ssm range 110B.    access-list 110 permit 235.1.1.1 0.0.0.0ip pim ssm default access-list 110C.    access-list 10 permit 235.1.1.0 0.0.0.255ip pim ssm range 10D.    access-list 10 permit 235.1.1.0 0.0.0.255ip pim ssm default access-list 10 Answer: C NEW QUESTION 502Refer to the exhibit. MPLS VPN service has been provisioned for customer ABC using an inter-AS MPLS option C. A network admin on ISP1 decided not to redistribute ISP2 received loopback addresses into IGP.Which five commands can be configured to guarantee an end-to-end connectivity between ABC sites? (Choose five.) A.    configure on ASBR1 BGP VPNv4 address-family neighbor 7.7.7.7 send-label B.    configure on ASBR1 BGP VPNv4 address-family neighbor 7.7.7.7 next-hop-selfC.    configure on RR1 BGP VPNv4 address-family neighbor 1.1.1.1 send-labelD.    configure on RR1 BGP IPv4 address-family neighbor 1.1.1.1 send-labelE.    configure on RR1 BGP IPv4 address-family neighbor 3.3.3.3 send-labelF.    configure on RR1 BGP VPNv4 address-family neighbor 3.3.3.3 send-labelG.    configure on ASBR1 BGP IPv4 address-family neighbor 7.7.7.7 send-labelH.    configure on ASBR1 BGP IPv4 address-family neighbor 7.7.7.7 next-hop-selfI.    configure on PE1 BGP VPNv4 address-family neighbor 7.7.7.7 next-hop-selfJ.    configure on PE1 BGP IPv4 address-family neighbor 7.7.7.7 next-hop-self Answer: DEGHJ NEW QUESTION 503Which two VPN Inter-AS options require the no bgp default route-target filter command? (Choose two.) A.    MPLS VPN Inter-AS with ASBRs exchanging VPN-IPv4 addressesB.    MPLS VPN Inter-AS with ASBRs exchanging IPv4 routes and MPLS labelsC.    MPLS VPN Inter-AS Option ABD.    MPLS VPN Carrier Supporting Carrier using LDP and IGPE.    MPLS VPN Carrier Supporting Carrier with BGPF.    MPLS VPN eBGP multipath support for CSC Answer: AC NEW QUESTION 504Which Cisco IOS command must be applied to create a multiprotocol VRF? A.    ip vrfB.    ip vrf forwardingC.    vrf definitionD.    vrf downgrade-cliE.    vrf forwarding Answer: C NEW QUESTION 505Refer to the exhibit. XYZ is using the BSR method and PE1 has the configuration shown. A.    Which statement describes why PE1 is unable to receive RP information from XYZ site 2?B.    IPv4 MDT address family is not activated between PE1 and PE2.C.    Loopback 3 is not enabled with PIM.D.    A mismatch exists for update source interface between PE1 and PE2.E.    A mismatch exists in MDT data subnet for XYZ VRF between PE1 and PE2. Answer: B NEW QUESTION 506Refer to the exhibit. An ISP network runs L3VPN MPLS over the IP core to deliver internet service for the customer as a central service through a dedicated VRF.Which route target plan delivers the internet service to customers while preserving customer VRF privacy? A.    vrf definition CUST-1route-target export 100:2route-target import 100:2!vrf definition CUST-2route-target export 100:1route-target import 100:1!vrf definition INTERNETroute-target export 100:1route-target import 100:2B.    vrf definition CUST-1route-target export 100:3route-target import 100:3!vrf definition CUST-2route-target export 100:3route-target import 100:3!vrf definition INTERNETroute-target export 100:1route-target import 100:2C.    vrf definition CUST-1route-target export 100:3!vrf definition CUST-2route-target export 100:3!vrf definition INTERNETroute-target import 100:1route-target import 100:2D.    vrf definition CUST-1route-target import 100:3!vrf definition CUST-2route-target import 100:3!vrf definition INTERNETroute-target import 100:1route-target import 100:2 Answer: D NEW QUESTION 507Which Inter-AS option allows a service provider to provision AToM along with L3VPN provisioning? A.    MPLS VPN Inter-AS with ASBRs exchanging VPN-IPv4 addressesB.    MPLS VPN Inter-AS with ASBRs exchanging IPv4 routes and MPLS labelsC.    MPLS VPN Inter-AS Option ABD.    back-to-back VRFs Answer: B NEW QUESTION 508Which option is the ATM Cell Relay feature that enhances throughtput and uses bandwidth more efficiently? A.    EXP marking match QoS LLD PHBB.    preferred-interfaceC.    cell packingD.    MPLS experimental bitE.    RSVP bandwidth reservation Answer: C http://www.passleader.com/350-029.html --------------------------------------------------- Images: http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/PassLeader-350-029-Braindumps17.jpg http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/4901_thumb1_thumb.png http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/4921_thumb_thumb.png http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/PassLeader-350-029-Braindumps26.jpg http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/4991_thumb1_thumb.png http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/5021_thumb1_thumb.png http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/5051_thumb1_thumb.png http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/5061_thumb1_thumb.png http://www.itexamquiz.com/passleader/plimages/324f5ac544ef_F100/PassLeader-350-029-Braindumps8.jpg --------------------------------------------------- --------------------------------------------------- Post date: 2015-01-04 09:12:58 Post date GMT: 2015-01-04 09:12:58 Post modified date: 2015-01-04 09:12:58 Post modified date GMT: 2015-01-04 09:12:58 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com