This page was exported from New Real Practice Test With VCE And PDF For Free Download [ http://www.actualtest.info ]
Export date: Thu Mar 28 22:46:24 2024 / +0000 GMT

[Sep-2016 Dumps] Share PassLeader New 1204q 400-101 Exam Questions


New Updated 400-101 Exam Questions from PassLeader 400-101 PDF dumps! Welcome to download the newest PassLeader 400-101 VCE dumps: http://www.passleader.com/400-101.html (1204 Q&As)

Keywords: 400-101 exam dumps, 400-101 exam questions, 400-101 VCE dumps, 400-101 PDF dumps, 400-101 practice tests, 400-101 study guide, 400-101 braindumps, CCIE Routing and Switching Written Exam, v5.1

P.S. Free 400-101 dumps download from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnRCUEFYcEhWZUw3OGNQY2FUSkptUXBrZDVzeE8zdkJQUERtOUFINDBFQW8

NEW QUESTION 1134
Refer to the exhibit. When packets are transmitted from r1 to r2, where are they encrypted?

A.    on the E0/0 interface on R1
B.    on the outside interface
C.    in the forwarding engine
D.    in the tunnel
E.    within the crypto map
F.    on the E0/1 interface on R2

Answer: A

NEW QUESTION 1135
Refer to the exhibit. Which action can you take to prevent loops and suboptimal routing on this network?

A.    Configure the rfc2328 compatibility command under the Cisco IOS OSPF routing process only
B.    Configure the rfc2328 compatibility command under the Cisco IOS OSPF NX-OS routing process only
C.    Configure the ref1583 compatibility command under the Cisco NX-OS OSPF routing process only
D.    Configure the ref1583 compatibility command under the Cisco IOS OSPF routing process only
E.    Configure the rfc2328 compatibility command Cisco IOS and NX-OS OSPF routing processes
F.    Configure the rfc2328 compatibility command under the Cisco IOS and NX-OS OSPF routing processes

Answer: C

NEW QUESTION 1136
Which three message type are used for prefix delegation in DHCPv6?(Choose three)

A.    Solicit
B.    Renew
C.    Advertise
D.    DHCP Discover
E.    DHCP Ack
F.    DHCP Offer

Answer: ABC

NEW QUESTION 1137
Refer to the exhibit. Which IPv6 migration method is in use on this network?

A.    6to4 tunnel
B.    NAT-PT
C.    ISATAP tunnel
D.    dual stack

Answer: D

NEW QUESTION 1138
Which two OSPF network type require the use of a DR and BDR? (Choose two)

A.    non-broadcast networks
B.    point-to-point networks
C.    point-to-point non-broadcast networks
D.    broadcast networks
E.    point-to-multipoint networks

Answer: AD

NEW QUESTION 1139
……

NEW QUESTION 1140
Which two statements about SSM are true? (Choose two)

A.    It is designed to support many-to-many applications within a PIM domain.
B.    It requires IGMPv3 for source filtering.
C.    It uses (*, G) multicast routing entries to make forwarding decisions.
D.    It can work in conjunction with the ISM service.
E.    Its application and protocols use address 233.0.0.0 ?233.255.255.255.

Answer: BD

NEW QUESTION 1141
Which command can you enter to configure a Cisco router running OSPF to propagate the static default route 0.0.0.0 0.0.0.0 172.31.15.1 within the OSPF process?

A.    default-information originate
B.    redistribute static subnets
C.    redistribute static metric 1 subnets
D.    redistribute static

Answer: A

NEW QUESTION 1142
Refer to the exhibit. If this network is in the process of being migrated from EIGRP to OSPF, and all routers are now running both protocols, which action must you perform to complete the migration?

A.    Change the EIGRP administrative distance to 95
B.    Change the OSPF administrative distance to 95
C.    Change the OSPF administrative distance to 115
D.    Change the EIGRP administrative distance to 115

Answer: D

NEW QUESTION 1143
Refer to the exhibit. What is the effect on the network when you apply these configuration to R1 and R2?

A.    Asymmetric routing occurs because the bandwidth and delay K value settings are mismatched.
B.    The interface bandwidth and delay settings adjust automatically to match the new metric settings.
C.    The neighbor adjacency between R1 and R2 temporarily resets and then reestablishes itself.
D.    R1 and R2 fail to form a neighbor adjacency.

Answer: AD

NEW QUESTION 1144
Which statement is true about IGMP?

A.    Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
B.    Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C.    IGMP message are encapsulated in PIM register message and send to the RP.
D.    Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.

Answer: B

NEW QUESTION 1145
……


Download the newest PassLeader 400-101 dumps from passleader.com now! 100% Pass Guarantee!

400-101 PDF dumps & 400-101 VCE dumps: http://www.passleader.com/400-101.html (1204 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)

P.S. Free 400-101 Exam Dumps Collection On Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnRCUEFYcEhWZUw3OGNQY2FUSkptUXBrZDVzeE8zdkJQUERtOUFINDBFQW8

Post date: 2016-09-23 03:50:45
Post date GMT: 2016-09-23 03:50:45
Post modified date: 2016-09-23 03:50:45
Post modified date GMT: 2016-09-23 03:50:45
Powered by [ Universal Post Manager ] plugin. HTML saving format developed by gVectors Team www.gVectors.com